Terp-Ready (Old Head TC) 240V

Terp-Ready by Old Head TC

Evolution has brought us to this point. The Terp-Ready provides that ball vape power in a somewhat cordless design. And it really is fantastic.

The patent-pending Terp-Ready system is comprised of the Dab-Ready heater, the Terp Hammer, and a 14mm glass extraction chamber. This system provides a high end concentrate* and dry flower/herb thermal extraction experience – using your favourite glass extraction rigs, all without torching, butane, or cords tethering your rig to a heater/controller!

Keep your favourite 25mm banger* at your preferred extraction temperature, and be ‘Dab-Ready’ at a moments notice, with the Dab-Ready by Old Head! 

The Dab-Ready is an electric heater designed to keep your 25mm quartz labware at your preferred extraction temperature. It will work with most quartz labware that has a 25mm bucket. (Quartz bucket must be 25mm from top to bottom, this will not work with flared bottom or faceted bottom 25mm labware)
 
This means no more torching, which means no more buying butane, and no more noisy heat-ups! With the Dab-Ready, your quartz is just quietly kept at temperature, and ready to use at a moment’s notice, which also means there’s no more lengthy cool-downs!

With the quartz labware in the heater on power-up, the labware will reach temperature within 3 minutes of first turning the unit on. Once the unit is powered on, it can generally heat your labware in about 90 seconds – but the device is meant to be turned on at the start of your session, with the labware in place, so that your labware is hot and ready whenever you want to use it. After use, just clean it out, and put it back on the heater, and it will be hot and ready by the time you’re ready to use it again!

When you’re ready to extract dried flower/herbs – simply put your banger aside (somewhere heat resistant if it’s hot!) and put the Terp Hammer in the Dab-Ready heater. In just a few minutes you’ll be ready to extract your dried plant material without being tethered to the heater by a cable, providing an extraction experience like no other! ‘Recharge’ time depends on how long the hammer has been off the heater, but it will generally be ready to go again in 30-90 seconds (as long as it hasn’t been kept off of the heater for too long).

This listing is for the Australian model, which operates at 240V.

Included

• 1 X Dab-Ready Heater
• 1 x Aus Power Cord
• 1 X Terp Hammer
• 1 X 14mm Glass Extraction Chamber
• 1 x Pack of Replacement Extraction Chamber Screens

WARNING:
– High-Power Heater! Use with caution!
– Metal components get extremely hot! Do NOT touch once powered on!
– Do not leave unattended while powered on!
– Do not use/set above 680F!